| Product ID | Formula | Purity | Dimension | Quantity | Price in € | Inquiry |
|---|---|---|---|---|---|---|
| 221300ST001 | TiAl | 99.5% | Ø 50.8mm x 3.175mm | 1 | POR | Inquire |
| 221300ST002 | TiAl | 99.9% | Ø 50.8mm x 6.35mm | 1 | POR | Inquire |
| 221300ST003 | TiAl | 99.95% | Ø 76.2mm x 3.175mm | 1 | POR | Inquire |
| 221300ST004 | TiAl | 99.99% | Ø 76.2mm x 6.35mm | 1 | POR | Inquire |
| 221300ST005 | TiAl | 99.95% | Ø 100mm x 16mm | 1 | POR | Inquire |
| 221300ST006 | TiAl | 99.99% | Ø 100mm x 16mm | 1 | POR | Inquire |
| 221300ST007 | TiAl | 99.95% | Ø 101.6mm x 3.175mm | 1 | POR | Inquire |
| 221300ST008 | TiAl | 99.99% | Ø 101.6mm x 6.35mm | 1 | POR | Inquire |
| 221300ST009 | TiAl | 99.99% | Ø 105mm x 16mm | 1 | POR | Inquire |
| 221300ST010 | TiAl | 99.99% | Ø 203.2mm x 6.35mm | 1 | POR | Inquire |
| 221300ST011 | TiAl | 99.99% | 457mm x 127mm x 8mm | 1 | POR | Inquire |
Titanium Aluminum Alloy Sputtering Target is an alloy sputtering target composed of titanium and aluminum. Different characteristics can be obtained by adjusting the titanium and aluminum content, with high hardness, low density, good oxidation and corrosion resistance, etc. It is mainly used in semiconductors, optics, decorative, and tool coating fields.
VIMATERIAL is a cutting-edge chemical innovation company specializing in high-performance materials for advanced engineering applications. Our products are characterized by high purity, stable performance, support for small lot orders, sufficient inventory, and short lead times. We also support target binding service and accept any product customization and experimentation, please contact us if you need anything.
Molecular formula: TiAl
Molecular weight: about 74.85
Appearance: Silver gray metallic target
Density: about 4.0g/cm³.
Melting point: about 1400-1500°C
Crystal structure: face-centered cubic crystal structure.
Aerospace: Titanium Aluminum Alloy sputtering targets are used to manufacture high temperature and high strength protective films for aircraft engine components, effectively improving engine performance and reliability.
Automotive industry: Sputtering of the alloy on the surface of key automotive engine components can enhance wear and corrosion resistance and extend the service life of the components.
Electronics and semiconductor industry: The thin films prepared by sputtering Titanium Aluminum Alloy targets can optimize the heat dissipation and electrical insulation properties of semiconductor devices and improve the stability of chip operation.
Medical devices: Ti-Al alloy coatings formed by sputtering give medical devices good biocompatibility and stain resistance, reducing the risk of infection.
Our products are subject to a strict quality management system. From incoming materials, processing, final inspection to factory inspection, there are strict inspection standards. Strict isolation measures are taken for unqualified processing to prevent unqualified products from flowing into the next process. According to customer requirements, we provide samples for customer re-inspection.
Titanium Aluminum Alloy sputtering targets are packed in double-layer vacuum bags and then boxed, and packed in cartons outside.
Titanium Aluminum Alloy sputtering targets should be stored in a dry, ventilated environment with suitable temperature and no corrosive gases. Vacuum packaging or sealed containers should be used to prevent oxidation and moisture, and contact with hard objects should be avoided to avoid surface damage.
VI HALBLEITERMATERIAL GmbH (VIMATERIAL) employs a stringent quality assurance system to ensure the reliability of our product quality. Strict quality control is implemented throughout the entire production chain, and for defective products, we strictly enforce the principle of rework and redo. Each batch is released only after passing detailed specification tests.
Every batch of our materials is independently tested, and, if necessary, we send samples to certified companies for testing. We provide these documents and analysis certificates with the shipment to certify that our products meet the required standards.
Contact our team of experts today and let us help you with your business!
